Jiaxing MT stainless steel co.,ltd.
Committed to global industrial innovation with more stable high-quality products and more efficient professional services.
Add to Cart
UNS N08904 Cold Drawn Bright Annealed Tube Size 19.05 mm * 1.65 mm
MTSCO has been dedicated to producing bright annealed tubes since 2014 , owning complete producing technology and abundant managing experience . And the raw material such as mother tube , round bar we use is from Chinese biggest and well-known steel mill : Walsin , Yongxing etc . Also we have advanced NDT equipments for the tests such as Eddy Current test , Ultrasonic test , Hydraulic test and so on . Welcome you contact us in free !
Stainless steel seamless bright annealed tube’s final surface is polished and bright annealed. And the polished grade is includes 180 # , 320 # , 400 # , 600 # , 800 # . According to standard very strictly , tubes which produced by us always have correct OD and WT tolerance. And they are very suitable for chromatography industry.
Where can be used ?
1 . General service industries ( petroleum , food , chemical , paper , fertilizer , fabric , aviation and nuclear
2 . Fluid , gas and oil transport
3 . Pressure and heat transmission
4 . Construction and ornament
5 . Boiler heat exchangers
6 . Decorative usage ( road lamp facilities , bridge handrail , expressway railing , bus stop , airport and gymnasium ) boiler , auto parts , medical equipment , building materials , food industry
| ASTM A312/A312M | EN10216-5 | |
| Elements | N08904(wt%) | N08904 / 1.4539 (wt%) |
| (C) Carbon, max | 0.02 | 0.02 |
| (Mn) Manganese, max | 2 | 2 |
| (P) Phosphorus, max | 0.04 | 0.03 |
| (S) Sulfur, max | 0.03 | 0.01 |
| (Si) Silicon, max | 1 | 0.07 |
| (Ni) Nickel | 23.0 - 28.0 | 24.0 - 26.0 |
| (Cr) Chromium | 19.0 - 23.0 | 19.0 - 21.0 |
| (Mo) Molybdenum | 4.0 - 5.0 | 4.0 - 5.0 |
| (Fe) Iron | Bal. | Bal. |
| (Cu) Copper | 1.0 - 2.0 | 1.2 - 2.0 |
| (N) Nitrogen | 0.1 | 0.15 |
| Corrosion Test | If clients need will be conducted |
| Chemical Analysis | Will be tested as per required quality standards |
| Destructive / Mechanical Testing | Tensile / Hardness / Flattening |
| Eddy Current Testing | Using digital flaw-mark testing System to do test and mark in surface homogeneities |
| Hydrostatic Testing | 100% Hydrostatic Testing carried out according to ASTM-A 450 norms for checking tube leakage, and biggest pressure we can support 20Mpa/7s . |
| Air Under Pressure Test | To check any evidence of air leakage |
| Visual Inspection | After passivation, every single length of tubes is subjected to thorough visual inspection by trained staff for detecting surface flaws & other imperfections |